MT-321 – Master's Touch

General info:

Product Code: MT321
Product Name: High Heat Clear coating
Category: Ceramic
Sub Category: Ultra
Area: Exterior

Surface: Car Body, Brakes & Calipers, aluminum, steel, and precious metals, plastic, leather
Mix:
Volume: : 30 ml
Warranty: 3 years

Masters touch High Heat Clear Ceramic coting is a harnessed advanced space-age technology with an extreme-heat nano-technology thermal coating. This high-resistance, super-thin, waterproof coating effectively utilizes the proven heat rejection properties of ceramics.
it’s designed for easy application on substrates where traditional insulation materials may fail or are impractical. By providing an exceptionally high level of reflective thermal insulation.
This hard film-forming anti-stick coating is resistant to UV degradation, chemical attacks, and freeze-thaw cycles

Product highlights:

– (ASTM B 117) on pre-rusted steel parts
– VOC compliant and AQMD Compliant
– Works even in the presence of excess salt contamination
– Promotes top-coating adhesion
– Non-corrosive and will not damage metal, plastic surfaces, substrate or welds
– Water based formulation
Does not contain caustics or petroleum distillates

Download

Instructions of use:

1.Preparation of the Surface:
— Make sure that surface is out of rust and clean
2.First coat:
— Apply by spray (Recommended) or brushing it onto the rusted surface. Aim for a 1-2 mils wet film thickness
3.Second Coat:
— After 30 to 60 minutes, apply the second coat. This is important to achieve maximum protection and ensuring the rust is fully neutralized.
4.Drying Time:
— Allow the treated surface to dry for 8 hours

Warnings:

•Toxic if ingested
•Severe eye and skin irritation
•Safety Recommendations:
•Ventilation: Use in a well-ventilated area to avoid inhalation of fumes or vapors.
•Personal Protective Equipment (PPE): Wear protective gloves and goggles to avoid skin and eye contact.
•First Aid Instructions:
•Skin contact: Rinse affected area with water for at least 15 minutes and seek medical attention. Remove contaminated clothing.
•Eye contact: Flush eyes with water for 15 minutes, lifting the eyelids occasionally. Get immediate medical attention.
•Ingestion: Don’t induce vomiting. Drink water or milk of magnesia to dilute the product and seek immediate medical help.
Inhalation: Move the person to fresh air. If breathing is difficult, provide oxygen or artificial respiration and get medical help.

Contact Details:

Email:

Work Hours:

Master's Touch

General info:

Product highlights:

Instructions of use:

Have any questions?

Oil & Gas

Marine

Construction

Aviation

Automotive

Our Clients